Showing 4 results for Radiation
R. Hasanzadeh, S. Fathi, T. Azdast, M. Rostami,
Volume 17, Issue 2 (6-2020)
Abstract
Heat transfer in foams consists of conduction through solid and gaseous phases, convection within the cells as well as radiation through the whole medium. Radiation thermal conduction affects the overall thermal conductivity by 40% in a high porosity. Therefore, the investigation of that term seems to be necessary. Radiation thermal conduction depends on the extinction coefficient which its determination is experimentally complex. In this study, this coefficient is theoretically estimated using Glicksman model for polyolefin foams and is verified in comparison with the experimental data. Extinction coefficient which plays an effective role in the radiation thermal conduction depends on the morphological properties including foam and solid densities, cell and strut diameters. The results demonstrate that the radiation thermal conduction decreases by reducing cell size and increasing foam density and strut diameter. An L25 orthogonal array of Taguchi approach is used for optimization of radiation thermal conduction respect to foam density, cell and strut diameters as variable parameters. The analysis of variance results illuminate that foam density and cell diameter with 58 and 32% contribution are the most effective parameters on the radiation thermal conduction, respectively. At optimum conditions according to the prediction tool of Taguchi approach, the radiation thermal conduction significantly decreases to 1.0908 mW/mK.
Salma Bessalah, Samira Jbahi, Mouldi Zagrouba, Hajji Sawsen, Amel Raoufi, Mustpha Hidouri,
Volume 19, Issue 2 (6-2022)
Abstract
Abstract
In this research, Gelatine (GEL)/ Chitosan (CH) wound dressing was prepared and irradiated with gamma rays from 60Co source for wound healing applications. GEL-CH composite characterization and functional properties were determined. The structural changes occurring after γ-irradiation at doses from 5 to 25 kGy were reported by physico-chemical techniques such as Electron Paramagnetic Resonance (EPR), Fourier Transform Infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Electrochemical Impedance Spectroscopy (EIS) studies. The antioxidant capacity was studied using DPPH (1,1-diphenyl-2-picrylhydrazyl free radical) scavenging and the antibacterial activities of Staphylococcus aureus and Escherichia coli were observed using liquid medium. Results revealed that EPR spectroscopy of un-irradiated GEL-CH showed 2 paramagnetic centers correspond to g=2.077 and g= 2.079. After irradiation, no active centre was appeared. A dose-dependent decrease in the central signal intensity was detected, then the EPR signal intensity almost disappears at 20 kGy. Gamma rays caused a slight increase in ion conductivity. FTIR suggest a slightly crosslinking phenomenon at 20 kGy. The XRD analysis does not show peak indicating crystallinity between a range of 2θ (15–30°). Moreover, γ-irradiation elevated the Scavenging DPPH radical activity (0.75 ± 0.07%). Gamma rays did not affect the antibacterial activity of GEL-CH wound dressing against pathogenic bacteria. The innovative results showed that the required γ-radiation for sterilization was ranged from 5 to 25 kGy. It permits to improve the physico-chemical and biological properties and maintain the native structural integrity of the GEL/ COL wound dressing
Ghada Ben Salah,
Volume 21, Issue 3 (9-2024)
Abstract
This study reported the biological changes occurring after γ-irradiation of in vivo rat model and the osteochondral protective effect of Gelatine-Chitosan-Ginger (GEL-CH-GING). The results showed that Electron Paramagnetic Resonance (EPR) Spectroscopy of GEL-CH-GING showed two paramagnetic centres which correspond to g=2.19 and g= 2.002. The Fourier transform infrared spectroscopy (FTIR) analyses revealed an increase in peak intensity at C–H chains, as well as, C=O carbonyl groups. The X-ray diffraction (XRD) analysis showed no change of crystallinity. After gamma ray exposure, the rat groups have received an osteochondral defect and then were treated with GEL-CH-GING composite. Sixty days post-surgery, a significant reduction in thiobarbituric acid-reactive compounds (TBARs) was seen when compared to non-implanted rat group. Concerning oxidative stress status, GEL-CH-GIN significantly improved Superoxide Dismutase (SOD) 76 nmol/l, Catalase (CAT) 0.79 nmol/l, and Glutathione Peroxidase (GPx) 1.77 nmol/l activities in osteochondral tissue. Regarding the histomorphometric parameters of cartilaginous tissue (nCg.Th, µm), (cCg.Th, µm), (Cg.Th, µm), irradiated-GEL-CH-GIN group showed a significant increase as compared to irradiated group with 116, 74 and 188 µm, respectively (p<0.01). The microanalysis showed a high percentage of O and C in the regenertaed osteochondral tissue and indicated the deposition of novel collagen matrix. The biomechanical behaviour showed a significantly enhanced hardness measurement (1.73±0 .029 VH, p<0.05) when compared with that of irradiated group
Biochemical markers suggested an osteocartilage repair capacity. In fact, the levels of IL-1β, IL-6, TNF-α and VEGF in the implanted rat with GEL-CH-GING composite exhibited 51±3.48, 30.05±5.18, 65.12±4.33 and 40.42±3.32 ng/l, respectively. Our findings suggested that GEL-CH-GING composite might have promising potential applications for cartilage healing.
Sumrit Mopoung, Khachidapron Seeoon,
Volume 22, Issue 2 (6-2025)
Abstract
Activated carbon preparation from tamarind wood derived charcoal by microwave-assisted sodium chloride activation was studied to investigate the effects of 0-5 wt.% NaCl and 450-850 W microwave heating power. The properties of the derived products were analyzed by FTIR, XRD, SEM-EDS, and BET. Methylene blue adsorption by the activated carbon products was also studied to evaluate the contract time, pH, methylene blue concentration, and adsorption isotherms. The study’s results showed that the percent yields (77.42-92.52%) of the fabricated activated carbons decrease with increasing wt.% of NaCl and MP. On the other hand, the contents of disordered graphitic carbon, carbonate, basic surface functional groups, and mesopores increased. However, 3 wt.% NaCl and 600 W microwave irradiation power were identified as appropriate conditions for activation, which created the micro-mesopore (pore size range 1.59 -14.76 nm) on the surface of the derived activated carbon products. Optimal values of equilibrium time and pH for methylene blue adsorption are 60 minutes and 8, respectively. The results of methylene blue concentrations were fitted to the Langmuir isotherm indicating 33.33 mg/g as the maximum methylene blue adsorption capacity.
